SMOK LP1 Replacement Coils are the dedicated coil heads for the SMOK Novo 4, Novo 4 Mini, and RPM 25W pod systems. Each pack contains 5 coils, and there are 5 resistance options to choose from, all tuned for mouth-to-lung vaping. The LP1 platform uses a simple press-fit installation that makes swapping coils a quick, tool-free process. Whether the goal is a classic tight draw with salt nicotine or a slightly looser restricted pull, the LP1 coil lineup has an option built for it.
SMOK designed the LP1 series to cover the full MTL spectrum within a single coil family. Mesh, dual-coil, and turbo mesh variants each bring something different to the table in terms of warmth, airflow restriction, and flavour character. The result is a pod system ecosystem where users can fine-tune their draw and flavour intensity just by changing the coil, without needing a different device or pod.
Quick Links: SMOK Novo 4 Replacement Pods
SMOK LP1 Replacement Coils Specs at a Glance
| Spec |
Details |
| Quantity |
5 coils per pack |
| Coil Options |
0.8ohm Meshed, 0.8ohm DC MTL, 1.2ohm DC MTL, 0.9ohm Turbo Mesh MTL, 0.9ohm Mesh |
| Vaping Style |
Mouth-to-lung (MTL) |
| Installation |
Press-fit |
| Compatible Devices |
SMOK Novo 4, Novo 4 Mini, RPM 25W |
Which SMOK LP1 Coil Is Right for You?
Five coil options might seem like a lot for an MTL platform, but each one delivers a noticeably different experience. The mesh variants focus on flavour clarity and warmth, the dual-coil options bring a richer, denser pull, and the turbo mesh sits in between with fast ramp-up and bold vapour for its size.
0.8ohm LP1 Meshed (MTL)
The standard mesh coil in the LP1 family. Even heat distribution across the mesh strip delivers clean, consistent flavour with a smooth MTL draw. A well-rounded everyday coil that pairs naturally with salt nicotine at 20mg.
0.8ohm LP1 DC MTL (Dual Coil)
Dual-coil design at the same 0.8ohm resistance. Two heating elements working together produce a warmer, denser vape with slightly more vapour than the single mesh. A good pick for vapers who want extra richness from their MTL draw.
1.2ohm LP1 DC MTL (Dual Coil)
Higher resistance dual coil for the tightest draw in the LP1 range. Runs at lower power for excellent battery life and a cool, restricted pull that closely mimics a traditional cigarette. Ideal for high-strength salt nicotine and all-day stealth vaping.
0.9ohm LP1 Turbo Mesh MTL
Turbo mesh technology pushes more vapour and flavour intensity than the standard mesh at a similar resistance. A slightly warmer, bolder hit that still stays firmly in MTL territory. Suited for vapers who want the most flavour the LP1 platform can deliver.
0.9ohm LP1 Mesh
A straightforward mesh coil at 0.9ohm. Sits between the 0.8ohm meshed and the 1.2ohm DC in terms of draw tightness and warmth. A balanced option that works well across a wide range of salt nicotine strengths.
How Do the SMOK LP1 Coils Compare?
All five LP1 coil options at a glance.
📊 LP1 Coil Comparison Chart
| Coil |
Resistance |
Type |
Draw |
Best For |
| LP1 Meshed |
0.8ohm |
Mesh |
Smooth MTL |
Everyday flavour clarity |
| LP1 DC MTL |
0.8ohm |
Dual Coil |
Warm MTL |
Richer, denser vapour |
| LP1 DC MTL |
1.2ohm |
Dual Coil |
Tight MTL |
Cigarette-style draw, battery life |
| LP1 Turbo Mesh |
0.9ohm |
Turbo Mesh |
Bold MTL |
Maximum flavour intensity |
| LP1 Mesh |
0.9ohm |
Mesh |
Balanced MTL |
Versatile middle ground |
Bottom line: The 0.8ohm Meshed is the safe, all-around starter. The 0.9ohm Turbo Mesh is for vapers chasing maximum flavour. The 1.2ohm DC MTL is the choice for the tightest, most cigarette-like experience with the longest battery life per charge.
Frequently Asked Questions
What devices are compatible with SMOK LP1 Replacement Coils?
SMOK LP1 Replacement Coils are compatible with the SMOK Novo 4, Novo 4 Mini, and RPM 25W pod systems. These coils are designed specifically for the LP1 pod housing and are not cross-compatible with older Novo coils, RPM coils, or RPM 2 coils. Always confirm the device uses LP1 pods before purchasing.
How do you install SMOK LP1 Replacement Coils?
Remove the pod from the device. Pull the old LP1 coil straight out from the bottom of the pod. Take the new coil and press it firmly into the pod base until it seats securely. Fill the pod with e-liquid and allow 5 to 10 minutes for the wicking material to fully saturate before taking the first puff. Skipping the priming step can cause a dry hit that permanently damages the coil.
What is the difference between the mesh and dual-coil SMOK LP1 options?
The mesh LP1 coils use a flat mesh heating strip that heats a large surface area of cotton evenly, producing clean and consistent flavour. The dual-coil (DC) LP1 options use two separate heating elements that work together to produce a warmer, denser vape with slightly more vapour. Mesh tends to favour flavour clarity, while dual coil tends to favour warmth and richness.
How long do SMOK LP1 Replacement Coils last?
Most users can expect 1 to 2 weeks from a single SMOK LP1 Replacement Coil with regular use. Coil longevity depends on vaping frequency, wattage, and e-liquid sweetener content. Heavily sweetened e-liquids will caramelize on the coil faster, reducing lifespan. A noticeable drop in flavour or a burnt taste means the coil should be replaced.
What type of e-liquid works best with SMOK LP1 Replacement Coils?
Salt nicotine e-liquids at 20mg in a 50VG/50PG ratio are the ideal pairing for all SMOK LP1 Replacement Coils, as the entire lineup is tuned for mouth-to-lung vaping. The balanced ratio wicks efficiently in the small LP1 coil heads. Thick, high-VG e-liquids (70VG or above) should be avoided, as they can cause wicking issues and dry hits in the compact pod format.
What is the turbo mesh coil in the SMOK LP1 lineup?
The 0.9ohm LP1 Turbo Mesh MTL coil uses an enhanced mesh design that delivers faster ramp-up and more intense flavour compared to the standard mesh coils. It pushes more vapour while remaining firmly in MTL territory. It is the best pick in the LP1 family for vapers who prioritize bold flavour and do not mind a slightly warmer draw.
Are SMOK LP1 Replacement Coils compatible with the original Novo or Novo 2?
No. The LP1 coils are a separate platform designed for the Novo 4, Novo 4 Mini, and RPM 25W. The original SMOK Novo and Novo 2 use different pod and coil designs that are not interchangeable with the LP1 system. The Novo 3 also uses its own coil format. Only devices explicitly listed as LP1-compatible will accept these coils.
Where can SMOK LP1 Replacement Coils be purchased online in Canada?
SMOK LP1 Replacement Coils are available online at Vaping The Way (VTW). All five resistance options are stocked in 5-packs. Orders over $75 qualify for free shipping across Canada, and customers in Regina, SK receive free same-day delivery Monday through Friday.
