The Uwell Caliburn A2 Replacement Pods are the refillable cartridges for the Uwell Caliburn A2 and Caliburn A2S devices. Each pack contains 4 pods, each equipped with a built-in 0.9ohm mesh coil and a 2mL CRC (child-resistant) capacity. The top-fill design makes refilling straightforward, and the magnetic connection ensures the pod snaps firmly into the device with no wiggling or misalignment.
The Caliburn A2 platform is built around simplicity. The coil is integrated into the pod itself, so when the coil is spent, the entire pod gets replaced. No separate coils to stock, no installation steps beyond filling and inserting. The 0.9ohm mesh coil delivers a satisfying mouth-to-lung draw with clean flavour from the first fill, making it a natural match for salt nicotine e-liquids. The magnetic pod connection keeps things secure during everyday carry while still allowing quick pod swaps when switching flavours.
Uwell Caliburn A2 Replacement Pods Specs at a Glance
| Spec |
Details |
| Quantity |
4 pods per pack |
| Pod Capacity |
2mL (CRC) |
| Coil Resistance |
0.9ohm mesh (built-in) |
| Fill Method |
Top-fill |
| Connection |
Magnetic |
| Compatible Devices |
Uwell Caliburn A2, Caliburn A2S |
| Vaping Style |
Mouth-to-lung (MTL) |
Top-Fill Design and Magnetic Connection
The Uwell Caliburn A2 Replacement Pods use a top-fill system with a small rubber stopper that pulls back to reveal the fill port. Insert the e-liquid bottle nozzle, fill to the line, and press the stopper back into place. The design keeps things clean and minimizes the chance of overfilling or spilling.
On the device side, the magnetic connection means there is no threading or force-fitting involved. The pod drops into the battery section and the magnets pull it into the correct position automatically. This makes swapping pods between flavours a matter of seconds, and the hold is strong enough that the pod stays secure in a pocket or bag without coming loose.
Frequently Asked Questions
What devices are compatible with Uwell Caliburn A2 Replacement Pods?
Uwell Caliburn A2 Replacement Pods are compatible with the Uwell Caliburn A2 and Caliburn A2S devices. They are not compatible with the original Caliburn, Caliburn G, Caliburn G2, KOKO Prime, or Caliburn A3, which all use different pod designs. Always verify the specific device model before purchasing.
How do you refill Uwell Caliburn A2 Replacement Pods?
Pull back the rubber stopper on the top of the pod to expose the fill port. Insert the e-liquid bottle nozzle and fill to the indicated line. Do not overfill, as this can lead to leaking or gurgling. Press the stopper firmly back into place to seal the pod. For a brand-new pod, allow 3 to 5 minutes after the first fill for the wicking material to fully saturate before vaping.
Can the coil inside a Uwell Caliburn A2 Replacement Pod be replaced?
No. The 0.9ohm mesh coil is built into the Uwell Caliburn A2 Replacement Pod and cannot be removed or swapped separately. When the coil is burnt out or flavour quality drops, the entire pod is discarded and replaced with a new one. This integrated design simplifies maintenance since there are no separate coils to purchase or install.
How long do Uwell Caliburn A2 Replacement Pods last?
Most users get 1 to 2 weeks from a single Uwell Caliburn A2 Replacement Pod with regular use. Pod life depends on vaping frequency and e-liquid sweetener content. Heavily sweetened e-liquids will caramelize on the mesh coil faster, shortening pod life. A noticeable decline in flavour or a burnt taste means it is time for a fresh pod.
What type of e-liquid works best with Uwell Caliburn A2 Replacement Pods?
Salt nicotine at 20mg with a 50VG/50PG ratio is the ideal pairing for Uwell Caliburn A2 Replacement Pods. The 0.9ohm mesh coil is tuned for mouth-to-lung vaping at low wattage, which is the natural environment for salt nic. Freebase nicotine at 6mg or 12mg can also work. Avoid thick, high-VG e-liquids (70VG or above) as they may cause wicking problems in the small pod format.
What does CRC mean on the Uwell Caliburn A2 Replacement Pods?
CRC stands for child-resistant container. It refers to the packaging and pod design meeting child-resistant safety standards. The 2mL pod capacity and fill mechanism are designed to comply with regulations that help prevent accidental access to e-liquid by children. The CRC designation does not affect the vaping performance of the pod itself.
Are Uwell Caliburn A2 Replacement Pods compatible with the Caliburn G or KOKO Prime?
No. The Caliburn A2 pods use a different form factor and connection type than the Caliburn G and KOKO Prime pods. The two pod families are not interchangeable. The Caliburn A2 and A2S share their own dedicated pod, while the Caliburn G, G2, and KOKO Prime share a separate pod system.
Where can Uwell Caliburn A2 Replacement Pods be purchased online in Canada?
Uwell Caliburn A2 Replacement Pods are available online at Vaping The Way (VTW). The 0.9ohm mesh pods are stocked in 4-packs. Orders over $75 qualify for free shipping across Canada, and customers in Regina, SK receive free same-day delivery Monday through Friday.