VooPoo's PnP coil platform is one of the most widely adopted coil systems in the pod mod world. One coil family that spans the Drag S, Drag X, Drag 3, Vinci, Argus, and every other PnP-compatible device in the VooPoo lineup. The name says it all: Plug-n-Play. Push the coil in, it clicks into place, and it is ready to go. No threading, no guesswork. Five coils per pack, and with seven resistance options covering direct-lung, half direct-lung, and mouth-to-lung styles, there is a PnP coil for virtually every vaping preference.
The range starts at 0.15ohm for high-wattage cloud production and extends to 1.2ohm for tight, cigarette-style MTL draws. Mesh coils dominate the lower resistance options for maximum flavour surface area, while the higher-resistance PnP-R1 and PnP-C1 cater to salt nicotine users who want a restricted draw with smooth throat feel. It is a genuinely versatile ecosystem, and the snap-in installation makes swapping between styles a 10-second job.
VooPoo PnP Replacement Coils Specs at a Glance
| Spec |
Details |
| Quantity |
5 coils per pack |
| Installation |
Plug-n-Play (push-fit, no threading) |
| Coil Options |
0.15ohm PnP-VM6, 0.2ohm PnP-VM5, 0.3ohm PnP-VM1, 0.6ohm PnP-M2, 0.6ohm PnP-VM4, 0.8ohm PnP-R1, 1.2ohm PnP-C1 |
| Compatible Devices |
VooPoo Drag S, Drag X, Drag 3, Vinci, Argus, and other PnP-platform devices |
| Vaping Styles |
Direct-lung, half direct-lung, mouth-to-lung |
Which VooPoo PnP Coil Is Right for You?
Seven coil options can feel overwhelming at first, but each one targets a specific style. The mesh variants (VM series) prioritize flavour and vapour in a DL draw, the PnP-M2 offers a classic single-coil DL experience, and the higher-resistance options are purpose-built for MTL salt nicotine vaping.
0.15ohm PnP-VM6 Mesh (60-80W, DL)
The heavy hitter. Mesh heating element at the lowest resistance in the PnP lineup. Designed for high-wattage direct-lung vaping with maximum vapour and bold flavour. Pairs best with 3mg freebase.
0.2ohm PnP-VM5 Mesh (40-60W, DL)
A step down in wattage from the VM6 with slightly better coil longevity. Still a full DL mesh coil with excellent flavour and dense clouds. A good balance between performance and battery life.
0.3ohm PnP-VM1 Mesh (32-40W, DL)
The most efficient DL mesh coil in the lineup. Lower wattage means longer battery life and less juice consumption without sacrificing the mesh flavour advantage. A practical everyday choice for DL vapers.
0.6ohm PnP-M2 Single (20-28W, DL)
Traditional single-wire coil at 0.6ohm. A cooler, more relaxed DL draw compared to the mesh options. Lighter on battery and juice. A solid pick for vapers who prefer a laid-back direct-lung experience without the intensity.
0.6ohm PnP-VM4 Mesh (20-28W, Half DL)
Mesh coil tuned for a half direct-lung draw, sitting right between full DL and MTL. A versatile pick for vapers who find DL too airy and MTL too tight. Works well with both 6mg freebase and lower-strength salt nic.
0.8ohm PnP-R1 Dual (12-18W, MTL)
Dual-coil MTL configuration. A warm, flavourful mouth-to-lung draw with a bit more vapour than the C1. Pairs naturally with 20mg salt nicotine for a satisfying restricted-draw experience.
1.2ohm PnP-C1 Ceramic (10-15W, MTL)
Ceramic heating element for the tightest draw and purest flavour in the PnP family. Extremely low wattage means exceptional battery life. The closest thing to a cigarette draw in the lineup. Ideal for high-strength salt nic.
As a general rule, the VM-series mesh coils are the performance picks for flavour and vapour production. The PnP-M2 is the low-key DL option. The PnP-R1 and PnP-C1 are built for MTL vapers using salt nicotine in the 20mg range.
How Do the VooPoo PnP Coils Compare?
All seven PnP coil options side by side.
📊 PnP Coil Comparison Chart
| Coil |
Resistance |
Wattage |
Style |
Best For |
| PnP-VM6 Mesh |
0.15ohm |
60-80W |
DL |
Max vapour, bold flavour |
| PnP-VM5 Mesh |
0.2ohm |
40-60W |
DL |
Balanced DL performance |
| PnP-VM1 Mesh |
0.3ohm |
32-40W |
DL |
Efficient everyday DL |
| PnP-M2 Single |
0.6ohm |
20-28W |
DL |
Relaxed, cooler DL |
| PnP-VM4 Mesh |
0.6ohm |
20-28W |
Half DL |
Versatile middle ground |
| PnP-R1 Dual |
0.8ohm |
12-18W |
MTL |
Warm MTL with salt nic |
| PnP-C1 Ceramic |
1.2ohm |
10-15W |
MTL |
Tight draw, pure flavour |
Bottom line: For maximum flavour and clouds, the VM6 leads the pack. For the most versatile everyday coil, the VM1 hits the sweet spot of performance and efficiency. MTL users should start with the R1 for a warmer draw or the C1 for the tightest, cleanest pull.
Frequently Asked Questions
What devices are compatible with VooPoo PnP Replacement Coils?
VooPoo PnP Replacement Coils are compatible with the VooPoo Drag S, Drag X, Drag 3, Drag S Pro, Drag X Pro, Vinci, Vinci X, Vinci R, Argus Pro, Argus GT, and all other devices that use the PnP coil platform. The Plug-n-Play system is universal across VooPoo's pod mod ecosystem, so any PnP coil fits any PnP-compatible device.
How do you install VooPoo PnP Replacement Coils?
Remove the pod from the device. Pull the old coil straight out from the bottom of the pod. Take the new PnP coil and push it firmly into the bottom of the pod until it clicks into place. There is no threading involved. Once the coil is seated, fill the pod with e-liquid and let it sit for 5 to 10 minutes before vaping to allow the cotton to fully saturate.
Which VooPoo PnP coil is best for salt nicotine?
The 0.8ohm PnP-R1 and 1.2ohm PnP-C1 are designed for salt nicotine at 20mg or higher. Both provide a mouth-to-lung draw that pairs naturally with the smooth throat hit of salt nic. The R1 offers a slightly warmer, looser pull, while the C1 delivers the tightest draw and cleanest flavour using its ceramic heating element. The 0.6ohm PnP-VM4 also works with lower-strength salt nic for a half DL style.
What is the difference between PnP mesh coils and regular PnP coils?
PnP mesh coils (VM series) use a mesh heating strip instead of traditional wire. The mesh distributes heat more evenly across a larger surface area of the wicking material, which results in better flavour, faster ramp-up, and more consistent hits. The non-mesh PnP-M2 uses a single wire coil for a more traditional vape feel, and the PnP-C1 uses a ceramic element for flavour purity. Mesh coils are generally the best choice for flavour-focused vapers.
How long do VooPoo PnP Replacement Coils last?
Coil life depends on wattage, e-liquid sweetener content, and usage frequency. Most PnP coils last 1 to 3 weeks with regular use. The lower-wattage MTL coils (R1 and C1) tend to last longer because they run at lower power. Heavily sweetened e-liquids will shorten coil life across all variants. Running coils within their recommended wattage range is the best way to maximize longevity.
Can VooPoo PnP coils be used for both freebase and salt nicotine?
Yes, but the coil choice should match the nicotine type. The lower-resistance DL coils (VM6, VM5, VM1, M2) are best paired with freebase nicotine at 3mg or 6mg. The higher-resistance MTL coils (R1, C1) are designed for salt nicotine at 20mg. Using high-strength salt nic in a low-resistance DL coil would deliver far too much nicotine per puff and an uncomfortably harsh throat hit.
What is the half direct-lung draw style on the VooPoo PnP-VM4?
Half direct-lung (half DL) sits between a full direct-lung draw and a mouth-to-lung draw. It is more restricted than a wide-open DL coil but not as tight as an MTL coil. The 0.6ohm PnP-VM4 mesh coil is tuned specifically for this style, making it a great pick for vapers who find DL too airy and MTL too tight. It works well with both 6mg freebase and moderate-strength salt nicotine.
Where can VooPoo PnP Replacement Coils be purchased online in Canada?
VooPoo PnP Replacement Coils are available online in Canada at Vaping The Way (VTW). The store stocks all seven PnP coil options and ships across Canada. Orders can be placed directly through the VTW online store for fast, reliable delivery.
